SAVE BIG! These critical front suspension parts will restore the factory road feel on your old 123. Watch the video as Kent will explain what they are, where they do, and what is involved in replacing them.
Product Details
This kit contains the following new parts:
- Upper control arms RIGHT AND LEFT
- Upper control arms to sway bar bushings x 8
- Lower control arm bushing kits x 2
- Lower ball joints x 2
- Brake control rod to subframe REAR mounts x 2
- Brake control rod to lower control arm rubber bushings
These items can also be purchased separately below. You may also need tie rods and steering idler arm replacement bushings. NEW shock absorbers will give it the final touch. Please see related products.
Related Products:
W116 and W123 Upper Control Arm Set
New left AND right side upper control arms. They will fit ALL W116 chassis from 1973 to 1980 ( except 6.9 ), and ALL W123 chassis sedans, coupes and wagons from 1977 to 1985.
W116 W123 W126 New Front Ball Joints x 2
One of the more common reasons for front end clunking over rough ground and sweeking when you turn your steering wheel. This is your set of right and left high quality ball joints. They fit Gasoline and Diesel Model Mercedes from 1973 to 1991 ONLY on the 116, 123, and 126 chassis.
W123 Front Suspension Guide Rod Mount Kit - for Both Sides
When these part wears, the control rod will move back and forwar and the joints will clunk when you go over bumps. This is becoming a very common failure part on these older 123 chassis. We provide you with replacements for BOTH sides (inner and outer as shown).
W123 Chassis Front Lower Inboard Control Arm Bushing Kit for BOTH Sides
Common 123 front end wear item. Bushings attach the lower control arm to the frame. Rubber fails and front end gets loose and noisy.
Location of lower control arm bushing
123 126 Front Suspension Guide Rod Mount Kit x 2
Bushing kit that attaches the front suspension guide rod to the lower control arm. This is a wear point that is often neglected and if loose can cause clunking in the front end. This is a complete kit for both sides. 2 kits included.
All 116 123 126 Front Upper Control Arm Bushings x 2
These bushing go on either side of the upper control arm where it attaches to the stabilizer arm. These should be replaced if worn or installed new upper control arms. SOLD IN A SET OF 4 as required by car. See related products below for the upper control arms that these bushing fit into.
W123 Loose Front End Steering Fix Kit
Special purchase. Only four kits are available at this price. Unless your steering box is all worn out, these are the parts you need to replace to get your W123 steering tight again. Be sure to get a front-end alignment after installing these parts. No instructions are included for this kit.
123 Chassis Front Bilstein Shock Set of (2) - COMFORT
FITS THE FOLLOWING all 123 chassis from 1977-1985 which include the 230, 240D, 240TD, 280E, 280CE, 300D, 300CD and 300TD.