ALERT: Miracle Paint is back in stock! CLICK HERE to order.
This kit has enough red clips (60) to do both sides on the 123 240D, 300D, 300TD, 300CD, 280E, and 280CE. You will receive the best tool to remove the side trim and the best tool to remove the old red clips from the side trim after removal.
These quality 6.5 inch wire cutters are made of special steel, the blades are high-frequency hardened steel. Suitable for cutting soft copper wire, plastic wire, small cable, aluminum wire, soft alloy wire, jewelry making, multifunctional manual edge banding pliers.
New LEFT side rear door seal for sedans only. Excellent quality aftermarket part with a good fit. If you need instructions, please look below to see the special tools that come with them.
If you own an older Mercedes sedan or wagon, it is a very good idea to remove all four door panels, repair components, clean drains, and, most importantly, lubricate all moving parts, as Kent explains in numerous YouTube videos.
Also covers the 1980 W116 sedans.
Also covers 1980 W116 sedans. In this 20-minute instructional video, Kent will walk you through the steps of getting the steel sunroof panel installed properly back into the car's roof. The first step will require cleaning, inspection, and possible replacement of the plastic slides.
Also covers 1980 W116 sedans.
Contamintion in the window washer fluid tank is one of the main reasons the spray nozzles get plugged up. Install this little fitler somewhere in the line between the pump and the nozzles on the hood and secure with zip ties.
Also covers 1980 W116 sedans. The sunroof transmission drive unit moves the cable back and forth to open and close the sunroof. Five gears inside this unit transfer the incoming drive from the motor ( high speed) to the final drive, moving the cable (slow speed).
This also covers the 1980 W116 sedan. In part one, Kent will show you how to get all the sunroof parts off our old Mercedes and on a bench, particularly if your sunroof is broken and not moving. In this 21-minute instructional video, here is a list of the subjects he covers:
In this 14 minute instructional video, Kent will show you how to safely remove the side window lower trim without damaging the car's paint or the soft aluminum trim. He will do this using his special tool to do this job. He will also show you how to install the trim back on without bending it.
This can be one of the hardest trim pieces to remove if you don't want to damage the car's paint or the aluminum trim itself. When working on detailing his 300TD wagon, Kent finally decided it was time to make a special tool for this operation.
Cad plating can be expensive but is great for show restorations. If you just want to make those parts on your old Benz look good then this is the closest paint Kent has found to looking like cadmium gold plating. Check out the pictures below of the fuel delivery brackets he did with this paint.
This video is loaded with tips on how to properly lubricate all the key components that make your sunroof operate smoothly and properly. It is NOT a complete manual on everything related to sunroofs. It will NOT show you all the details to get the sunroof out and back in.
BRAND NEW tight-fitting taillight seals for you 123. These are one of the key sources of water getting into your 1977 to 1985 sedan or coupe trunk.
In this 22-minute instructional video, Kent will take you inside the door on a W123 240D and show you all the key points that should be lubricated and the type of lubricants you should use.
Good used emblems as shown. All pins are in tack.
This is an above-average used bumper, as shown. It's not perfect. Study the pictures carefully. Chrome is clean and bright, and there is no major corrosion on the front or back, where you usually find severe aluminum corrosion.
Hard to believe we took so long to come up with this tool. It was Gerson's genius that made it happen. The secret turned out to be the hook that keeps the tool in place while stretching out the rubber donut. Wow! What a cool tool.
This one is a very nice passenger side front side rubber mounting bracket. Not rusty like most you see. The threaded mounting stud is fully in place and has not been broken off by rust. We include the special aluminum mounting spacer and nut for the back side. You will be happy with this one.
This was a good working unit before taken apart. All the internal parts are very usable. This will give you some repair spares for the future.
Kent jokingly mentions this has become a late W123 epidemic! You see this problem happening on all late model 240D, 300D, 300CD, and 300TD wagons.
This video will show Kent's technique on how to prime and paint alloy wheels using our wheel paint kit and masking dam that we sell separately. See below. The techniques will also apply to any spray can paint you should choose to use.
Maybe you have even tried this only to have to patch fall on the floor when you walk away... ( it has happened to Kent... :-) ).
This can happen when you least expect it! It happened to me right when I purchased a W109 300SEL and it can be really frustrating.
This fine fiberglass cloth, along with Miracle Paint, can really do some fine rust repair detailing. There are many uses. You can even repair broken plastic by roughing up the surface on the back side and applying multiple layers of cloth. Plan to be creative!
This on-demand training video will walk you through the steps you need to follow in order to get your headliner panel off so you can work on the sunroof. If your sunroof won't open, you are stuck - right? Not SO according to Kent.
This is the best tool we have found to remove the chrome side trim strips and snap type door panels on may of the older models from the mid 1960's to the mid 1980's.
DOES NOT INCLUDE HOOD PAD --- This special glue is not easy to find and the price has recently fluctuated drastically since 2021.This kit includes what you will need to successfully install a new foam hood pad in your older Mercedes.
DO NOT neglect your W123 hood hinge and firewall corner drains. The problems plugged drains can create arre many and the 123 sedans, coupes and wagons are more prone to front plugged water drains than any other model.
I have always dredded replacing a hood release cable. Finally on the last one I did, I decided to do something about those feelings.
Removing the tilting sunroof panel is a little bit of a mystery to many owners. Since there are no exposed fasteners, at first glance it can appear to be very difficult to remove.
Over half the W123's Kent looks at today have their original battery hold down clamps missing. Most just seem to rust away. Kent decided he had to come up with a solution by providing a replacement clamp and nut that would not rust!
Indications that your seal needs replacing are tears in the lip and no resistance when you close your trunk. If you trunk snaps shut too easily it means the seal has collapsed and is no longer sealing properly.
If a car has sat outside in the elements for long periods and has not been washed or waxed in months there are some things you need to do BEFORE you apply the buffer to the body and the final wax to the paint. This is where you will need some real "elbow grease."
In this video Kent covers the removal and replacement procedures for the sunroof air dam or otherwise known as the air deflector. Using a special technique and a plastic trim tool can prevent damage to the plastic clips. He also covers troubleshooting the reasons for improper operation.
In this video Kent will show you how to rid your car of those less than attractive rock chips and other paint flaws from door dings and general scratches. He will walk you through the paint and supplies you will need and then demonstrate step-by-step using a 2000 S500 and a 2000 E320 wagon.
When Kent set out to find a good fender cover for his own use he and Kaia decided to make it available to our customers. Who doesn't like a good soft fender cover that stays in place? We know red shows the grease more than black but you have to admit these are a knockout!
Do you have a manual or power sunroof that is working poorly or maybe not at all? Does it move slowly in the morning, but when it heats up during the day it works just fine? Do you have to assist it by hand to get it fully opened or closed?
If you have never replaced a hood star it can be frustrating getting the old one out and the new one in properly.
Our detailed instructions will explain how to do it in a few minutes with simple hand tools. Multiple pictures visually walk you through the process. PDF is 2 pages.
Can't get your trunk open with the key? Lost the key?
This instruction booklet is meant to be an introduction to simple rust repairs. I have also written a manual that goes into more advanced repairs using Miracle Paint to replace larger rotted sections of sheet metal.
New RIGHT side rear door seal for sedans only. Excellent quality aftermarket part with a good fit.If you need instructions, look below to view the special tools that come with them.
Please check your Vin number before ordering. New aftermarket high-quality rubber seal. Left front door seal. You may need new plastic clips or instructions and special installation tools. These are not included but can be ordered separately below.
Please check your Vin number before ordering. New aftermarket high-quality rubber seal. Left front door seal. You may need new plastic clips or instructions and special installation tools. These are not included but can be ordered separately below.
Grommets push into the holes in the trunk to hold the emblems for the right and left side as applicable. A must have if you plan to repaint your car. Video on how to remove your emblems without damaging them is included free. These will work on the following models.
Mercedes-Benz 230
Only one available as shown. This is a good working latch but it does have one problem. I have seen these get so badly rusted and corroded that they are impossible to repair. Not the problem with this one. Very clean and no rust.
Genuine Mercedes part. There are 4 clips that hold each of the two intake air grills (below wiper blades) to the bottom. If you are planning to remove them I recommend having new clips on hand. You need a total of 8 per car.
Brand new door striker for Right hand side, Front or rear.