ALERT: Miracle Paint is back in stock! CLICK HERE to order.
Kent's procedure uses the factory recommended "drip tube method" but with a "twist." He has devised a way to get accurate and consistant IP timing results while trying to get the drip tube to drip at one drip per second exactly when it should!
If you own and maintain an older car (especially 15 years and older) you must be willing to take care of its lubrication needs or you may spend big money later in repairs.
Ever wish you could find a good way to lube the door hinges on your old Benz? Maybe you have seen that little fitting wondering what it is, or maybe you have heard there is a special grease gun that can inject grease into that fitting?
If you are having problems with a sticking key a new tumbler a new tumbler and key may or may not fix your problem.
"I have heard some owners complain about the unreliability of those older Hirschmann power antennas. I would say that in at least 80 percent of the few hundred antennas I have taken apart that went bad - the reason was lack of lubrication!
Contains all supplies and video instructions you need - including a high speed power multitool to remove very fine scratches. Purchase together and save $$$$. Ever wish you could get rid of the annoying wiper scratches on your front windshield (or rear hatch glass if you have a rear wiper)?
Contains all supplies and video instructions you need - except a multitool (see description. )Ever wish you could get rid of the annoying wiper scratches on your front windshield (or rear hatch glass if you have a rear wiper)?
Any time you are removing and replacing your fuel injectors you will need to change the return hose and the heat shield crush washers. If you don’t, you will have leaking hoses and possible compression leaks at the injector nozzles.
If you have been around old Mercedes for any length of time, you have probably run into a problem with your ignition key starting to "stick" or one that does not turn. This problem can leave you stranded and could cost hundreds of dollars to fix $$$.
If you are having problems with a sticking key a new tumbler a new tumbler and key may or may not fix your problem.
If you have been around old Mercedes for any length of time, you have probably run into a problem with your ignition key starting to "stick" or one that would not turn. This problem can leave you stranded and could cost hundreds of dollars to fix $$$.
Worried about the internal condition of the fuel tank on your old 1959 to 1972 mechanical fuel-injected Mercedes? Not sure if it has rust or other contaminants inside it.
Kent has never seen fresh fuel hoses on all the old MFI Mercedes he has worked on over the years. They only seem to get changed when they start leaking. Leaking fuel hoses at the electric fuel pump is a fire hazard!
Leaking fuel injector pumps have become a very common problem in the 60x. engines produced from the mid 1980s to the mid 1990s. The early 60x.
Another great solution from Mercedessource!
1978 to 1995 Mercedes only
A broken radiator neck can be safely repaired if it breaks off cleanly in the center or aft of the center of the neck. If it breaks off too close to the tank or breaks off in multiple small pieces then we advise that you replace the radiator.
Distributor neglect is one of the most common neglected maintenance items that we see on the 6 cylinder 103 engine. Just because the engine is running ok does not mean that the parts are not worn out. One day you will get up in the morning and the engine will not start.
PLEASE NOTE: This is a wiring kit ONLY. You will need special FAST glow plugs and glow plug wires to complete a successful installation. This kit will not work with your orginal lopped-end series glow plugs.
Mercedes 108, 109, 114, 115, 116, 107, 123, 126, 124 and 201 chassis window trim has a super strong anodized coating that is impervious to hand polishing but still can oxidize when exposed to harsh environmental elements.
The plastic shift bushing is a very common part that needs to be replaced on older Mercedes. Can you believe it is the exact same part that was used on all models for over 25 years! It is an inexpensive part that can cause big problems if it breaks out.
This kit will allow you to replace the critical worn parts inside the early 603 U.S. made Garrett T3 turbochargers. This kit will not work if your engine has a KKK turbo made in Germany. The only way to tell which turbo you have is by visual inspection.
For ONE 116, 123 and 126 Chassis Sedans, Coupes or Wagon Seat Bottom. This unique kit is designed to help you repair and restore one broken down front seat bottom so common in the 116, 123 and 126 chassis Mercedes built from 1973 to 1991.
If you are going to buy or have just purchased an older 5 cylinder Mercedes Diesel (1975 to 1985) the first thing you need to do is a good physical exam of the engine. Don't throw money at a car that has a dying engine.
If you are going to buy or have just purchased an older 4 cylinder Mercedes Diesel the first thing you need to do is a good physical exam of the engine. It is even better to do this BEFORE you purchase the car to prevent surprises and pain in your wallet.
This is one of the best safety upgrades you can make on your old Benz - Let there be light !!!
Are you mysteriously losing coolant? Having heater problems? Does your heater have a mind of its own. Then your 201 chassis vacuum controlled heater valve may be bad.
This new formula has a thicker viscosity for easier application on vertical surfaces and when using fiberglass cloth. Works on any rusty Mercedes Ponton 190SL 230SL 250SL 280SL 220SE 300SE 250SE 280SE 300SEL 450SL 450SEL 300SD 200D 220D 240D 300D 300CD 300TD and others.
FITS THE FOLLOWING: 115, 116, 123, and 126 chassis. Here is a diesel item I have put together that every Mercedes diesel owner should have.
These wrenches are fantastic labor savers. If you have been thinking about adjusting your diesels valves on your own - this kit will save you time, frustration, and high shop labor costs. Now is the time to get your own pair. NOW WITH RUBBERIZED GRIP HANDLES. Made in the U.S.
INCLUDES TRANSMISSION PEAK TUNING MANUAL. DO NOT ORDER SEPARATELY
Is your diesel suffering from hard brakes, poor or no engine shut off, climate control problems, or even funky transmission shifting??
FITS THE FOLLOWING All 116, 123 and 126 chassis diesel cars with 5 cyl. turbo engines. This includes 1982 to 1985 300D, 1982 to 1985 300CD, 1981 to 1985 300TD and 1978 to 1980 300SD / 1981 to 1985 300SD. THIS IS AN IMPORTANT MERCEDESSOURCE MAINTENANCE ALERT
FITS ALL 115 220D 240D 300D and 123 240D 300CD 300D 300TD with NON TURBO engines. THIS IS AN IMPORTANT MERCEDESSOURCE MAINTENANCE ALERT! In previous years I have had a number of Mercedes diesels come in to my shop with severe damage due to total drive line flex disk failure.
Note: Works only on models that have two vacuum lines coming of the pump cover. I am seeing lots of vacuum pump problems with the older diesels. They are reaching that age regardless of mileage where the pumps are failing right and left.
All 280SL 450SL 380SL 1972 to 1985. All 230SL 250SL 280SL. All 108 and 109 Sedan from 1965 to 1973 including 280SE/L 5.4 and 300SEL 3.5 and 4.5. All 114 and 115 sedans and coupes from 1968 to 1976 including 220D 240D and 300D. We are now offering a kit with 2 new tie rods.
APPLIES TO: The first general automatic climate control was introduced in 1977 in the U.S. market.
Kit contains right and left tie rod assemblies as shown. We have found if you discover one or more loose tie rod ball joints, it is always better to replace both rod assemblies at the same time. Entire assemblies are about the same price as two individual ball joints.
FITS THE FOLLOWING: All Mercedes Chassis 111 113 108 109 107 114 115 116 123 126 from 1968 to 1991 (not applicable for 201 or 124 chassis). This is a very common wear problem on most older Mercedes.
This unique kit will allow you to hook up a 30 in HG vacuum gauge between your vacuum control shifting valve (VCV) and your transmission modulator to test the VCV for proper function and to tune it for peak shifting performance.
Applicable to 114 115 116 123 and 126 Chassis, years and models listed above. Troubleshooting an annoying shift problem must first start with the vacuum modulator.
Only two plugs are available. These are best for spares with an engine that already has fast pencil plugs installed. They fit 4-cylinder flat head diesel 636 engines built in the 1950s.
If you are planning to install new glow plugs in your 601 engine, 190D from 1984-1986, it is essential that you ream the carbon out of the holes to prevent premature failure of your new plugs.
WARNING: PLEASE confirm you have the original engine in your diesel BEFORE ORDERING this kit. We keep getting owners ordering this kit only to find out a later model engine has been installed. This happens quite often.
If you own an early 123 4 cylinder diesel then this is a must have diesel engine kit! This glow plug upgrade will do three things that will put a smile on your face: 1. Your engine will start faster and cold idle smoother. 2. Your glow plugs will last longer. 3.
This kit includes a New Mercedes OEM fuel tank filter screen along with a special tool I have made to remove and install it. It will save you the time and expense of running out and buying a great big Allen wrench.
Can be installed on the following models: Please read carefully. All Turbo 116 and 126 300SD 1978 to 1985. All 123 turbo and non turbo 240D 300D 300CD 300TD 1980 to 1985. 1984 to 1989 201 190D. 1986 to 1991 126 300SDL 350SD and 350SDL. 1986 to 1993 124 300D and 300TD.
Can only be shipped UPS GROUND. NO INTERNATIONAL. Extra packaging charges may apply. It some cases it may be shipped in its own box depending on the size of your order and the other products included.
Fits the Following, 1975 to 1976 ONLY 115 chassis 300D and 123 chassis 300D 300CD and 300TD from 1977 to 1979 with series style loop glow plugs. SVO / WVO applicable. If you are tired of glow plug problems, then this kit is made for you.