ALERT: Miracle Paint is back in stock! CLICK HERE to order.
If you are having problems with a sticking key a new tumbler a new tumbler and key may or may not fix your problem.
This video is free with the purchase of Kent's new dash cluster pull tool set. If you just want to see how he uses the tools and some tricks to get difficult clusters out you are welcome to purchase this video separately. Approximate run time is 20 minutes.
Removing a Mercedes instrument cluster from any of the chassis listed is easy with these special "pull" tools. Many owners do not realize that the instrument cluster is just pushed into the dash panel and not held in with any bolts or screws.
Wouldn’t it be grand if there was a way to remove your ignition tumbler without a key - then easily start the car using a flat blade screw driver or needle nose pliers and drive away?
If you have been around old Mercedes for any length of time, you have probably run into a problem with your ignition key starting to "stick" or one that does not turn. This problem can leave you stranded and could cost hundreds of dollars to fix $$$.
If you are having problems with a sticking key a new tumbler a new tumbler and key may or may not fix your problem.
This video is not only going to show you how to remove and replace the “screw cap” style tumbler, but it also going to explain the theory of operation and how to avoid certain pitfalls when doing this job yourself. And YES, there are pit falls.
If you have been around old Mercedes for any length of time, you have probably run into a problem with your ignition key starting to "stick" or one that would not turn. This problem can leave you stranded and could cost hundreds of dollars to fix $$$.
Passenger front regulator. Very good used straight window regulator. Good working motor.
Any of us who have owned a 1977 to 1985 Mercedes W123 for any length of time have probably had to deal with the glove box door at some point. The hardest part is loosening and removing that weird little round slotted nut on the two hinge points.
For ONE 116, 123 and 126 Chassis Sedans, Coupes or Wagon Seat Bottom. This unique kit is designed to help you repair and restore one broken down front seat bottom so common in the 116, 123 and 126 chassis Mercedes built from 1973 to 1991.
If your 1990 to 1995 W126, W201, or W124 key is starting to stick in the ignition pay attention! Better to replace the part before the key gets stuck leaving you stranded. Because of the lockout feature in these cars, if you can not turn the key on - you can not even move the car off the road.
The lock and release mechanisms inside wear out over time, and when that happens, a new tumbler assembly will NOT fix the problem. If the internal wear is severe, the lock may not be repairable. We only sell these locks inspected, lubricated with a new tumbler installed, and tested.
Interior water leaks are very common. More so on the older 108, 116, 114, 115. 123, and 126 chassis than on the 201 and 124 chassis. This is largely due to the fact that the older models used rubber seals on the rear glass and on the front windshield (except the 126).
It is not as easy to remove the right side underdash panel in the 126 chassis as you might think. There are a number of hidden fasteners, some of which can be a little confusing as to how to remove properly. Kent has seen a lot of broken and damaged panels that confirm this.
Understanding how an inside rear view mirror is mounted is essential for proper removal and replacement. The mirror can be easily damaged if you do not know the tricks to getting it snapped back into the mounting bracket in the head liner.
In this video Kent shares his technique for removing a padded steering wheel on most 107, 114, 115, 116, 123, 126, and 201 to 1985 chassis. These are the models WITHOUT an airbag.
You will need to remove the W126 chassis center console upper wood panel when replacing the climate control switch panel, replacing any of the upper switches, replacing burned out light bulbs and /or when remove the center console or the upper dash.
In this video Kent shares his secrets on how to make the inside of an old Benz look like new again. Now granted, you must have a reasonably good car to start with. He is not going to show you how to reupholster, change seats and door panels, etc.
NEW aftermarket knob almost identical to originals. Sold in sets of two as shown above.
GOOD used shoulder harness latch mechanism complete with rail holder and black plastic cover. MAKE SURE your LATCH HOLE is like the one below. Later latches had a smaller slot.
In this 17-minute video instruction, Kent walks you through the steps to install his door liner kit using thick, clear, and high-quality plastic sheets on both front and rear doors. A W123 sedan is shown here, but the principles are similar for other chassis.
Replace your old and worn knob with this inexpensive genuine Mercedes part.
This is the actual carpet piece you will receive.
You can purchase these individually, but you might want to consider replacing all four at the same time. If one is broken others are not far behind. Watch Kent's video below to see what happened to him and why he decided to manufacture these himself.
This is a very common problem on the W123. The wood will just fall off someday. Worse when the car is left outside or in a hot climate.
This video will not only save the condition of your door panel, but it will save you a lot of time and frustration when you go to replace a door panel after doing maintenance inside your door. Those old plastic film liners always seem to be torn, ripped, and downright ugly.
This is for passenger side. It will fit the driver side but you will not have the wire for the seat belt buzzer. Make sure this will fit your style shoulder harness. SEE PICTURE.
Very good bolt with tight hex. Always use thread locking compound when replacing these bolts. Easy to round out with the wrong tool. See correct tool below:
Only one available. Make sure yours is an exact match before ordering. Good clean and strong latching mechanism.
Your male harness insert MUST LOOK THE SAME as this picture.
This video is part of the full net repair kit we sell. See related products below. If you choose just to watch this video, you will have to source your own bungee cord and crimping sleeves.
This on demand video only covers the principles of how to get a non-memory power seat in a 1980 to 1990 Mercedes to move forward and backward so you can get to the bolts to remove the seat from the car or remove the seat spring from the track assembly.
If you have a reasonably good front seat bottom that is just a little HARD to sit on for any length of time then this "booster" kit may help solve your problem.
Our seat spring repair kit has been a great success! It can easily repair sagging on broken front seat springs. But what about seat padding. A lot of the older ( 1970's to 1980's glued fiber seat padding can crush down and even disintegrate over time.
For all 108 109 114 115 107 116 123 126 201 and 124 Chassis 1968 to 1995 including those models that have a special cable installed to keep the transmission locked until the key was turned.
When you are out looking to buy an older Mercedes in this time period you have to be careful. You have heard that these old Benz (particularly the diesels) can go forever! So why is mileage that important. Because contrary to those "myths" they do not go forever without impeccable maintenance.
Door panels have to come off when fixing power windows, power seat switches and wiring, door check straps, door latches and locks, and clearing drains. Lubrication is a key factor in preventing premature failure on a number of interior door components. You have to remove the panel to lubricate!
This is an above average used leather rear seat from a 1986 300SDL. It will fit all 126 sedans but the upholstery pattern is typical of those models in leather from 1981 to 1987.
From my experience the only thing that goes wrong with the front seat back pockets is the top bungie cord that holds the net up wears out (loses its “spring”) and sags badly. When was the last time you saw a 1973 to early 1990's seat back netting that was NOT sagging???
Fits all 126 chassis sedans 1981 to 1991. Depending on the type of regulator you have it may or may not apply to all four of your doors. Recommend you remove the door panel first to inspect (see below).
PDF complete detailed step-by-step instructions (4 pages) to walk you through changing out your ignition tumbler.
5 page PDF digital instructions to walk you through changing out your ignition tumbler.
Is your drivers seat starting to sag more than it use to? Are you finding it is just not comfortable any more on long trips? Maybe it tips to one side and you are constantly trying to compensate your weight to the other side.
For all 108, 109, 114, 115, 107, 116, 123, 126, 201, and 124 chassis from 1965 to 1995. I wrote this repair guide to show you how to properly remove your instrument cluster and replace worn or failing components. (NOTE: This is not a detailed manual on how to repair the components.
Brand new Hazard Flasher rocker type switch, located in Center console between window switches for 240D 300D 300TD 190E 190D 300SD 420SEL 380SL and other models from 1982 to 1991. If you are unsure it will fit your model, visually verify picture with existing switch.
Excellent used Left shoulder harness catch with wiring removed from low mileage car. If you have a 300SD you should get a spare.
New instrument cluster bulb with socket holder. Sold individually. PLEASE NOTE: This holder is only for the very small warning indicator bulbs, as well as your dash turn signal indicator lights. It is NOT for the larger bulbs that light your dash at night.
Excellent used black plastic arm rest trim ring. has no breaks
Excellent used working front seat belt catch. ONLY FITS EARLY MODELS WITH ALL CHROME SHOULDER HARNESS LATCH. Can fit right or left front seat.
PART NUMBER on seatbelt is 126 860 14 69
Over the years I have used many different products to try to adhere chrome and trim pieces to body and interior panels. None has performed better for me than E6000. Silicone glue can't compete. When dry it holds like nothing else.