ALERT: Miracle Paint is back in stock! CLICK HERE to order.
Also will work on (some but not all) 1976 to 1980 280SE, 280SEL, 280SL and 280E. Brand new aftermarket fuel accumulator for the 1976 to 1985 V8 engines. It is mounted near the fuel filter under the back end of the car and hardly ever gets replaced.
In this 46 minute very detailed step-by-step video instruction, Kent will show you how to remove the fuel delivery system from your 1986 to 1991 420SEL, 300SE, 300SEL, 560SEL, 560SL, and 560SEC, take it over to your bench and take it all apart, install new pumps, filter, accumulator, and hoses, t
DOES NOT INCLUDE ANY METAL FACTORY HARD LINES!!! What you SEE in the picture is exactly what you will receive. Many of these particular big V8 models are now becoming true collector cars and going up in value at a steady rate.
It was difficult to find a filter to fit the correct size outlet hose. Install this steel 10-micron filter in your fuel tank outlet hose to protect your fuel pump. Clamps are provided along with a pull to plug the fuel hose temporarily to reduce fuel spills.
All 380SL, 380SE, and 380SEL owners take note. Even if you acquire a nice 380 like Kent's Cherry you are going to need some or all of these components ( unless of course it was recently done by a competent mechanic ).
PLEASE LOOK AT YOUR SYSTEM BEFORE ORDERING to confirm the type of accumulator you have. ( Watch the last video below for examples )For systems with ONE HOLE ACCUMULATOR only. Some 450SL, 450SLC, 450SE, 450SEL with 4.5 and W116 280SE .
This highly detailed 24-minute DIY video instruction will show you how to do the following on your EFI R107: Inspect the rear hoses for fuel leaks, drain the fuel out of your fuel tank, take the fuel pump and filter assembly apa
Since new original style pumps are no longer made, this is the best way to finally fix your old fuel pump leaks and poor performance.
This on-demand instructional video was filmed to go with Kent's new fuel tank sending unit service kit launched in June of 2020. This is not a complete video on the subject of fuel level sending units. For the complete video see related products below.
If your fuel gauge stops working or is not reading accurately, many times it can be repaired by removing it from the fuel tank, taking it apart and giving it a good internal cleaning of the contact points, float shaft, and wires.
Fits all 380SL and 380SLC from 1981 to 1985. This flexible fuel hose connects the outlet of the fuel filter to the metal hard fuel line going from the rear of the 380SL to the engine compartment. This hose is hard to install and hard to inspect.
Note that this video is free of charge when you purchase our 380SL rear fuel hose replacement kit ( see related products below).
High-quality fuel filter for your later model R107 SL. With the right tools and knowledge, you may not need to drain your fuel tank to replace this filter ( replacement should be every 30,000 miles for peak performance. Watch Kent's video below for installation tips.
In this video, Kent will show you how to safely and cleanly remove the fuel from the tank on your older Benz. You will need to drain the fuel anytime you replace the back end hoses, the tank filter screen, the fuel pump or the fuel filter.
Video instructions that come free of charge with the purchase of Kent's special tool to remove 107 fuel tank screens. This video will NOT be of much help if you do not purchase the tool, but it is being offered for anyone who would like to view it regardless. Total run time:
For many years, we were receiving frantic requests from customers asking for help with removing the fuel tank filter screen from their 1971 to 1989 350SL, 450SL, 380SL, 500SL, or 560SL (the same issue also applies to all SLC coupes). Until recently, we did not have a solution other than to tell
Kent has sourced 2 special Viton o-rings for the outer pump housing on these early djetronic Bosch electric fuel pumps. There are two orings that harden with age causing the pump to leak fuel at the outer end of the pump.
We know that many of you own multiple Mercedes, including both gas and diesel models. If you own one of Kent’s fuel injector pressure testers you no doubt will want to test all your applicable mechanical fuel injectors in both types of older engines.
In this short video, Kent will give you an overview on setting up and using Version 3 of his bench mount CIS gasoline injector pressure tester.
This 24 minute on demand training video comes with our injector back flush cleaning kit. You can purchase this video separately, but please keep in mind you will not have any of the tools or supplies to complete this procedure yourself.
With these old gas fuel injectors, sometimes you just have to "back flush" the insides to restore them to peak performance. There is no guarantee that back flush cleaning will restore every old gasoline mechanical fuel injector. Some are just plain worn out.
This is a collection of SPECIAL tools Kent has put together to help you grab, twist, and pull on things in and around your Mercedes. He makes each one of these tools right here in his shop.
I have used a lot of different clamping tools over the years to prevent fluids from leaking out when removing coolant, fuel, or brake fluid hoses. Most work ok. Some are hard to use in tight places. Many do not stop every last drip from coming out of the hose.
New Bosch fuel filter as shown. Before ordering please make certain that this fits your Benz. Not all gas fuel filters are created equal.
Applies to all Mercedes: Pre 1960, 190SL, 110, 111, 112, 113, 114, 115, 108, 109, 107, 116, 123, 126, 201 and 124 chassis. If you ever need to replace a fuel tank, fuel pump, fuel filter, or fuel hose and don't want the fuel running down your arm here is the tool and will save the day!