ALERT: Miracle Paint is back in stock! CLICK HERE to order.
In this 24 minute instructional video Kent will explain the process of how to bench clean and test your D-jetronic fuel injectors in your own garage or workshop once they are removed from the engine.
This will give you everything you will need ( except 12-volt power and cleaning fluid ) to bench clean and test your D-jetronic fuel injectors in your own garage or workshop once they are removed from the engine.
In this 26 minute instructional video Kent will show you how to hook up a CIS fuel pressure tester to your older K-jectronic gas engine.
This xx minute video will take you step by step through the process of modifying your warm up regulator so you will be able to easily make adjustments to your cold start control pressure.
With the required pressure tank you will be able to individually test and clean our D-jet fuel injectors. Along with a 12-volt power source, you will need I gallon of cleaning fluid as described in the instructions.
Before you make this modification you should be very familiar with the function of the WUR and how its pressure adjustements affect the performance of the K-Jetronic fuel injection systems. The tools and supplies offered in this kit will allow you to modify your warm up regulator at home and it y
New Mercedes o-ring as shown. Always replace this seal when removeing and cleaning your fuel tank strainer ( screen ).
PLEASE NOTE: Possible shipping delay. This is a special order item and may take up to 7 days before we can ship it!
This 25 minute video will instruct you on how to replace the fuel injectors in your 1976 to 1980 8-cylinder M117 engine safely and efficiently. This is a fairly straightforward job, but there are some pitfalls you will want to avoid.
PLEASE READ BEFORE ORDERING: The plastic injector holders are no longer availabe. The video instructions will show we include them in the kit so PLEASE disregard. You will have to use your old holders and install the new green seals we include.
This 33 minute video will instruct you on how to replace the fuel injectors in your 8-cylinder M116 engine safely and efficiently. This is a fairly straightforward job, but there are some pitfalls you will want to avoid.
This 16-minute video will instruct you on how to replace the fuel injectors in your 6 cylinder M110 safely and efficiently. Since this is a fairly straight forward remove and replace this is not a step-by-step video.
This is every thing you need along with free video instructions by Kent Bergsma. Why change the K-jet fuel injectors in your M110 engine. One thing is they are very old. Second this is right now they are readily available and resonably inexpensive.
We modify this wrench right here in our shop. If a picture is worth a thousand words, what is a video work. Watch the following for a full explanation.
Why change K-jet injectors when "they are working?" Why change shocks when they feel ike "they are working." The deteration is very slow over time and you may not notice the difference in how the engine starts, runs, accelerates, and delivers mileage until you do this service!
RUST FREE fuel pump bracket as shown with new rubber mounts and nuts included. This one could be plated or painted for show quality as it is not pitted.
You would be amazed at how much fuel can leak out of a fuel hose when you disconnect it from your tank or engine. This is an easy way to prevent messy spills.
When “rebuilding” an old Bosch mechanical fuel injector, replacing the nozzle is usually enough get it working again at peak performance. But sometimes you will run into a fuel injector that just won't fire right nor product a correct fan spray pattern.
When “rebuilding” an old Bosch mechanical fuel injector, replacing the nozzle is usually enough get it working again at peak performance. But sometimes you will run into a fuel injector that just won't fire right nor product a correct fan spray pattern.
Fuel hose as shown. Connects to bottom of fuel tank and drops down to fuel damper. Make sure you do not have a 1975 or early 1976 with electronic fuel injection.
This kit will not fix all your pump problems. If the motor is worn or burnt out, this won't help. But if the lower impeller is "stuck" due to lack of use and old fuel, then this could be a simple fix. In the video below, Kent will explain what this kit can fix and why it is needed.
It has now become essential that you replace this filter screen on these old cars, especially if they have been using gasoline with ethanol in it and the car has sat or sits for long periods without running.
This is our most complete FID kit yet. Kent wanted to make sure you would have all the parts you need including hardware.
Did you hear these are not available? No part number anywhere? Well, as the source we went to work and made it happen. You can now purchase the correct copper sealing rings for your OM616 and OM617 injection pump delivery valves.
Most 1988 to 1993 6 cylinder CIS fuel injection delivery (FID) systems are old and tired and have not been properly maintained. These include the W201 190E 2.6, the W124 260E 300E, 300CE, 300TE, the W126 300SE, and 300SEL, and the R129 300SL.
The original screws in these pumps get pretty nasty looking over time. When you try to clean them will a wire wheel the plating will be completely removed and the heads will rust again pretty quickly. Now you can install new original looking yellow zink plated screws and washers.
This hose assembly was used on the fuel delivery systems in the late 1970s and early 1980s. Installed on some R107 450SL and 450SLC, W116 450SE / L and 280SE, and the W123 280E and 280CE. Be sure to check your car before ordering to make certain this hose is installed.
Those old hardened and discolored plastic fuel hoses in your diesel engine compartment probably need to be replaced. When they crack and break you can dump a ton of fuel out on the road before your engine quits and leaves you stranded.
In this 13-minute video instruction Kent will show you how to make your own accumulator tee hose connection either using parts from. our kit ( see below) or parts you purchase yourself. This video is included free with the purchase of our kit.
This kit will give you everything you need to fix the leaking or aged Tee hose between the fuel damper and the fuel accumulator on most 1977 to 1980 fuel delivery systems. Watch the video below to learn why this is needed.
Kent will take you over to his workbench and completely take apart a rusty and old fuel delivery system from a 1980 450SL and put it all back together again with some shiney new paint and parts supplied in his special kit for these cars. This video runs for 24 minutes.
Brand new aftermarket fuel accumulator for the 1986 to 1991 V8 engines. It is mounted near the fuel filter under the back end of the car and hardly ever gets replaced. What does it do and how do you know if it is bad.
Also will work on (some but not all) 1976 to 1980 280SE, 280SEL, 280SL and 280E. Brand new aftermarket fuel accumulator for the 1976 to 1985 V8 engines. It is mounted near the fuel filter under the back end of the car and hardly ever gets replaced.
In this 46 minute very detailed step-by-step video instruction, Kent will show you how to remove the fuel delivery system from your 1986 to 1991 420SEL, 300SE, 300SEL, 560SEL, 560SL, and 560SEC, take it over to your bench and take it all apart, install new pumps, filter, accumulator, and hoses, t
DOES NOT INCLUDE ANY METAL FACTORY HARD LINES!!! What you SEE in the picture is exactly what you will receive. Many of these particular big V8 models are now becoming true collector cars and going up in value at a steady rate.
It was difficult to find a filter to fit the correct size outlet hose. Install this steel 10-micron filter in your fuel tank outlet hose to protect your fuel pump. Clamps are provided along with a pull to plug the fuel hose temporarily to reduce fuel spills.
All 380SL, 380SE, and 380SEL owners take note. Even if you acquire a nice 380 like Kent's Cherry you are going to need some or all of these components ( unless of course it was recently done by a competent mechanic ).
PLEASE LOOK AT YOUR SYSTEM BEFORE ORDERING to confirm the type of accumulator you have. ( Watch the last video below for examples )For systems with ONE HOLE ACCUMULATOR only. Some 450SL, 450SLC, 450SE, 450SEL with 4.5 and W116 280SE .
This highly detailed 24-minute DIY video instruction will show you how to do the following on your EFI R107: Inspect the rear hoses for fuel leaks, drain the fuel out of your fuel tank, take the fuel pump and filter assembly apa
Since new original style pumps are no longer made, this is the best way to finally fix your old fuel pump leaks and poor performance.
This on-demand instructional video was filmed to go with Kent's new fuel tank sending unit service kit launched in June of 2020. This is not a complete video on the subject of fuel level sending units. For the complete video see related products below.
If your fuel gauge stops working or is not reading accurately, many times it can be repaired by removing it from the fuel tank, taking it apart and giving it a good internal cleaning of the contact points, float shaft, and wires.
This is a very critical and very neglected filter located inside the fuel tank.
In this 7+ minute instructional video, you will learn how to cleanly and safely drain the fuel out of your old Benz.
This highly detailed 37-minute video instruction will show you how to do the following: Determine if your original pump needs replacing, drain the fuel out of your fuel tank, remove the old pump assembly, take it apart on the bench and install the new pump, filter, and hoses, and properly reinsta
Since new original style pumps are no longer made, this is the best way to finally fix your old fuel pump leaks and poor performance. This kit is designed specifically for the W108 and W109 small V8 sedans.
Fits all 380SL and 380SLC from 1981 to 1985. This flexible fuel hose connects the outlet of the fuel filter to the metal hard fuel line going from the rear of the 380SL to the engine compartment. This hose is hard to install and hard to inspect.
Note that this video is free of charge when you purchase our 380SL rear fuel hose replacement kit ( see related products below).
High-quality fuel filter for your later model R107 SL. With the right tools and knowledge, you may not need to drain your fuel tank to replace this filter ( replacement should be every 30,000 miles for peak performance. Watch Kent's video below for installation tips.