Search | Engine

Displaying 301 - 350 of 526
$34.95

Late 60x (602 and 603) Diesel Prechamber Collar Nut Socket

Special Splined Socket

This is a special pre-chamber collar nut removal socket ONLY that works on the diesel engines in the 1990 to 1991 350SD 350SDL (126 chassis), 1990 to 1993 300D 2.5 (124 chassis), and 1992 to 1995 300SD / S350 (140 chassis).

$46.00

1990 to 1995 60x OM(602 and OM603) Diesel Prechamber Removal Special Fitting for Slide Hammer

Slide hammer not included. Can be purchased below with a slide hammer if you don't already have one.

 This is a special pre-chamber threaded fitting that you can attach to YOUR slide hammer  to remove the pre chamber on 1990 to 1991 350SD 350SDL (126 chassis), 1990 to 1993 300D 2.5 (124 chassis), and 1992 to 1995 300SD / S350 (140 chassis).  You will need to own or purchase a 5 lb slide hammer a

$17.95

116 123 Turbo Alternator belts - Set of (2)

Fits turbo diesel 1978 to 1980 300SD and 1981 to 1985 300DT, 300CDT, 300TDT (Turbo Models Only)

Brand new set of (2) Contitech Alternator Belts. Fits models listed above.

$39.60

High Visibility Easy Adjust Click-Stop 3/8 Inch Drive Torque Wrench and Case

Perfect size for torquing spark plugs and other under 50 ft. lbs. important engine components.

This is a huge improvement over the older torque wrenches that I have seen around for years. I know it is a little more expensive, but after you use it, you will agree it is well worth the money. It is perfect for spark plugs and mid-size fasteners around the engine.

$31.80

Engine Crank Rotation Adjustable Length 1/2 Inch Drive Ratchet Wrench

Rotate Engines on 220D 240D 300D 300CD 300TD 300SD 300SDL and all V8's from 1970 to 1991 - Extends to 18 inches long!

This is Kents new favorite ratchet wrench for turning engines over during service and repair. There are a number of maintenance procedures that require you rotate the engine over by hand.

$16.75

Axle Shaft Seal

Final drive seal (45 x 65 x 11mm)

Fits Mercedes Benz:

$45.80

Early Diesel Pre Chamber Removal Threaded Tool (up through 1987 models only)

A slide hammer is required. A collar nut tool is required. See the full explanation below

If you already have or are willing to buy a 5 pound slide hammer this special threaded fitting will allow you to PULL the pre-chamber from the cylinder head once you have removed the collar nut and the glow plug ( a collar nut removal tool is required look below to learn more).

$18.95

617 Diesel Flywheel Flex Plate Hold Down Ring - USED

For OM 617 non turbo and turbo in 1977 to 1985 300D 300CD 300TD and 300SD

Good used ring for flywheel bolts as shown. These often get damaged with you have to cut one of your flywheel bolt heads off.

$19.95

60x Injection Pump Stop Lever Shaft Leak Fix Repair KIT

For 5 and 6 cylinder diesels 1986 to 1995

This is one of the more common oil leaks I see on the 602 (5 cylinder) and 603 (6 cylinder) diesel engines. In fact, I have seen it on almost every one of these engines I have worked on.

$4.20

615 616 617 Diesel Engine Vacuum Pump Housing Bolts and Washers x 6

Fits diesel vacuum pumps 1969 to 1985 220D 240D 300D 300CD 300TD 300SD

A set of six new high-quality stainless steel short bolts with wave washers is included, as shown. These mount the vacuum pump to the engine block. It is very common for this type of hex bolt to round out when removing them from the vacuum pump.

$59.50

617 Diesel Garrett T3 Turbocharger Custom Overhaul Tool Set

For all 5 cylinder turbo 300SD 300D 300CD and 300TD 1978 to 1985 (NO instructions included)

This set of special tools is designed to help speed the removal and ease the overhaul of a Garrett T-3 turbocharger on a 617 turbo diesel engine.

Sale
$19.00

1/2 Inch Drive Clicker Torque Wrench 20 - 150 Ft. Lbs.

CLEARANCE ONLY 2 LEFT. diesel fuel injectors and wheel bolts!!!

If you are going to work on your diesel fuel injectors, you are going to need a torque wrench. If you are going to tighten your alloy wheel lug bolts properly, you should use a torque wrench. In fact, if you do your own work, you should have a 1/2-inch clicker torque wrench in your toolbox.

$23.95

Diesel Injector Removal Socket and Pick with Instructions

Finally we can offer a strong and very deep socket that will work on all Bosch Diesel Injectors from the late 1950's to 1994

Works on 110, 115, 116, 123, 201, 126 and 124 diesel engines 200D 220D 240D 300D 300CD 300TD 300SD 190D 300SDL. We have found that over half of the deep sockets we test will not go over some of the longer injectors.

$9.25

Crank Pulley Removal Heavy Duty Hex 6 mm Socket

Fits 6 bolts on front crank pulley set on 240D 300D 300CD 300TD 300SD 1974 to 1985

Maintenance Alert: We have had lots of reports of these bolts loosening up! They WILL shear off if not caught early enough. When that happens the pulley will fall off. At high speed this can lead to engine overhead and even a damaged radiator.

$28.50

615 616 617 Diesel Engine Injection Pump Timing Drip Tube

For setting Injection pump timing per factory manual.

For use on 220 240D 300D 300CD 300TD 300SD 1968 to 1985. NO INSTRUCTIONS INCLUDED: The tool is meant for someone who has the factory manual or who already knows how to adjust their injection pump timing on the older diesel engines. Injection pump timing is critical for peak performance.

$149.95

6 cylinder 603 engine Auxiliary Fan

Fits 1987 300D and 300TD / 1986 and 1987 300SDL --- Also fits 1985 YEAR 300SD ONLY

Brand new Meyle Auxiliary fan motor for 6 cylinder diesel engines from 1986 and 1987.

$34.00

6 Cylinder 603 Diesel Fuel Injector Nozzle (1)

German made for us by Wolfswerke-sachsen ( same company and same nozzle that was formerly branded as Monark)

Fits 300SDL 300D 300TD 300SD 350SDL S350D 1986 to 1993

PLEASE NOTE THE FOLLOWING:

$19.50

616 617 Diesel Engine Front Pulley, Counterbalance and Crank Seal Replacement Guide

Applies to 4 and 5 cylinder diesel engines 1974 to 1985 (except 190D)

Kent originally wrote this manual to go along with our 617 Turbo Diesel Front Crank Seal Replacement Kit as well as our 616 and 617 NON Turbo Crank Seal Kit. We have found that many of you are having problems with your front crank bolt loosening up or bolts sheer

$22.75

60x Diesel Engine Compartment Fuel Hose and Clamp Replacement Kit

For 190D 1984 to 1993 and 300D 300TD 300SDL 350SD 350SDL 1986 to 1993

This inexpensive kit will allow you to replace the old hardened and brittle fuel hose in your 601 602 or 603 diesel's engine compartment as well as those old worn out factory clamps with new high quality worn gear clamps that will not cut into the rubber hose.

$14.25

61x Diesel Engine Compartment Fuel Hose and Clamp Replacement Kit

For early diesels 1968 to 1985 220D 240D 300D 300CD 300TD 300SD

This inexpensive kit will allow you to replace the old hardened and brittle fuel hose in your diesel's engine compartment as well as those old worn out factory clamps with new high quality worn gear clamps that will not cut into the rubber hose.

$98.50

617 Diesel Garrett T3 Turbocharger Turbine Wheel ( Impeller) and Shaft

For all 5 cylinder Garrett turbos on 300SD 300D 300CD and 300TD 1978 to 1985

New turbo charger turbine shaft and exhaust turbine wheel as shown. This part has been highly balanced and is ready for installation. Make certain your compressor wheel is not bent or damaged as that could throw it out of balance. Comes with new shaft nut.

$119.00

603 6 cylinder Head gasket Set

1986 to 1987 300D 300TD 300SDL

Brand new Head gasket set for 6 cylinder diesel engines from 1986 to 1987. Does not include valve cover or valve stem seals.

$28.50

615 616 617 Diesel Engine Fuel Injector Metal Line Replacement

PLEASE READ CAREFULLY. This line will not fit the 601 602 and 603 diesel engines produced from 1984 to 1995. If you order in error this part is not returnable. See applicable models and years in subtitle. We had this new straight hard line specially manufactured for us in Germany.

$29.95

602 603 Diesel Engine Coolant Thermostat w/ INSTRUCTIONS

Fits models listed below with these engines ONLY from 1986 to 1995

New Behr thermostat 80 degree C with gasket. Comes with illustrated installation tips. Instructions are specific for early 603 engine 1986 and 1987 but will apply to other models as well (some specific details may not apply to the later models).

Fits the following models:

$14.95

603 6 Cylinder Diesel Valve Cover Gasket

All 126 124 and 140 chassis with 603 engine. See models below

New valve cover gasket for applicable models listed below with 603 engine.

  • Mercedes-Benz 300D
  • Mercedes-Benz 300SD
  • Mercedes-Benz 300SDL
  • Mercedes-Benz 300TD
  • Mercedes-Benz 350SD
  • Mercedes-Benz 350SDL
$26.50

M116 and M117 V-8 Engines Oil Filter TWIN PACK

R107 W116, W126 V8 Model years 1973 to 1991

Quality German oil filter quantity of 2. For 450, 380, 500, 420, and 560 engines.

Easy to replace. You do not need to get under the car. Access to the lid is on the right side of these engines just below the forward section of the valve cover.

$27.50

617 Diesel Garrett T3 Turbocharger Installation Gasket Set

For all 5 cylinder turbo 300SD 300D 300CD and 300TD 1978 to 1985

Use this gasket kit to install a rebuilt or good used turbo charger on your engine. Does not include exhaust manifold to engine block gasket but you do not need to remove the exhaust manifold to change the turbo. This is a gasket set only. NO INSTRUCTIONS INCLUDED.

$8.20

617 Turbo Diesel Front Crank Pulley Mounting Bolt Set (6)

Fits all TURBO 300D 300CD and 300TD 1981 to 1985 and 300SD models 1978 to 1985

Correct metric hex bolt to mount the front crank pulley to the crank counterbalance. These bolts become rusty, are easy to round out, and sometimes even break duty to engine vibration. Check the torque of these bolts.

$6.95

Late 123 and 126 Chassis Blue Plastic Radiator Drain Plug

For only models listed below from 1980 to 1991. Check color of your plug before ordering.

New Plastic Drain Plug. Fits all models listed below:

 

Mercedes-Benz 240D

Mercedes-Benz 280CE

Mercedes-Benz 280E

Mercedes-Benz 300CD

Mercedes-Benz 300D

Mercedes-Benz 300SD

Mercedes-Benz 300SDL

Mercedes-Benz 300TD

$20.50

Early Chassis Power Steering Replaceable Filter

Fits 110 111 112 113 108 109 107 114 115 116 Models with Power Steering Listed below

January 2019 notice: This filter is now available only in very limited quantities and may not be readily available in the future. This is why we are not able to include it in our full fluid flush kit ( See related products below) This is an often neglected filter.

$38.50

123 Turbo Diesel and Some 126 Diesel and Gas Engine Motor Mounts - Set of 2

ALSO FITS 116 300SD --- Fits only those models listed below from 1978 to 1991

Set of 2 rubber motor mounts. These mounts fit TURBO DIESEL 300CD, 300D, 300SD, 300SDL, 300TD, and gas V8  380SE, 380SEC, 380SEL, 420SEL, 500SEC, 500SEL, 560SEC, 560SEL. These are high failure rubber parts on older cars.

$59.50

126 300SD Turbo Diesel Contitech V-Belt Set

New! Extra belts included so you don't have to pre-measure or end up with the wrong alternator belts!

This is a very important maintenance item for 126 300SD 5 cylinder turbo diesel owners. When these belts get loose or worn they can cause all kinds of problems like poor battery charging, engine overheating, jerky power steering, and noises that range from squeaking to rattling.

$12.75

Diesel Engine Aluminum Sealing Ring Assortment - Various Sizes

240D 300D 300CD 300TD 300SD 1977 to 1985

Here is an assortment of 12 aluminum and copper sealing rings used in different locations on diesel engines and transmissions. This is not a complete set. Random spares from Kents stock. Handy to have in the garage for spares.

$1.75

Early Diesel Fuel Injection Pre-chamber Seal Ring STD.

190Dc 190D 200D 220D 240D 300D 300CD 300TD 300SD 1963 to 1985

Crushable seal ring that fits between the prechamber and the cylinder head. Standard thickness approximately 2.0mm. SOLD INDIVIDUALLY. New seals may be required to repair fuel and air leaks around the top of the prechambers. Special tools are required to replace this seal.

$5.75

Early Diesel Fuel Injection Pre-chamber Seal Ring 2.3mm

190Dc 190D 200D 220D 240D 300D 300CD 300TD 300SD 1963 to 1985

Crushable seal ring that fits between the prechamber and the cylinder head. Genuine first oversize thickness 2.3mm. SOLD INDIVIDUALLY. New seals may be required to repair fuel and air leaks around the top of the prechambers. Special tools are required to replace this seal.

$49.95

617 Turbocharger Garrett T3 Compressor Wheel

For 1978 to 1985 Turbo Diesel 300D 300TD 300CD 300SD with Garrett Turbo

Brand new balanced compressor wheel as shown. Increase horsepower by installing a new compressor impeller. The sharp clean edges really make a difference in compressor boost output. Most of these old wheels are worn. No instructions included.

$92.50
Currently out of stock.

615 616 617 EARLY 60x (601 and 603) Prechamber Removal Tool w/ Instructions

Yellow slide hammer no longer available. New Silver Version 4 is available now. See related products below.

UPDATE: This yellow slide hammer is no longer available. You can purchase our new silver Version 4 model. See related products below. This is one of the tools you will need to remove stubborn pre chambers.

$69.50
Currently out of stock.

615 616 617 Early 601 and 603 Diesel Prechamber Collar Nut Torquing Tool

12/1/21 Update: Version 1 sold out and no longer made.To purchase upgraded Version 2 of this tool see related products below:

Tightens and Removes Collar Nuts on 220D 240D 300D 300CD 300TD 300SD 300SDL 190D 2.2 1969 to 1987. Works on most Mercedes diesel engines up through 1987 only. ALSO FITS OM 636

$48.00

W123 617 Turbo Diesel Water Pump Drive Pulley ( Used )

Most 5 Cylinder turbo diesels 1981-1985 300TD and 1982 to 1985 300D and 300TD - outside diameter measures 6 and 15/16 inches.

Good used water pump double belt drive pulley for OM 617 turbo engines. WARNING: There are different sized pulleys floating around out there. Your engine could have been changed. PLEASE Measure your EXISTING pulley BEFORE ordering.

Pages