ALERT: Miracle Paint is back in stock! CLICK HERE to order.
These old power non-tilting sunroofs are now 40-plus years old. These are specifically the sunroofs that used the later style round motor.
This is part 2 of Kent's 9-part video series on servicing and repairing the power sunroofs on the 1980 to 1985 W123, W126, and W201. This video will cover ONLY those issues related to the sliding roof panel.
You must inspect the sway bar, especially if the car has been subjected to road salt. Kent will explain in more detail in the video below.
Both in good used condition as shown
When replacing the pan or the gasket we recommend installing these new stainless hex bolts and washers. You can see the pans these will work on below.
Did the engine just quit? Does it just not start even with prolonged cranking? What could it be? The first thing you want to determine with most older cars is whether there is spark to the plugs.
I have chosen to call this a "partial" overhaul kit because full rebuild kits have been NLA for years. However, many of these pumps still need help, so I have assembled this kit to help owners restore some of their lost vacuum output.
For 1990 to 1995 W124, W126, R129 and W140. Does NOT fit W201 190E.
For repairing non-structural areas only with Miracle Paint and fiberglass.
Have you ever wished you could get your hands on a manual that would answer all your diesel complaint questions?
When you download this from your "account" at Mercedessource.com you can print it on standard 8 1/2 x 11 paper, or you can view it from any computer if you are logged in at Mercedessource.
These two types of fiberglass can bridge over small to medium rust holes and give a lasting repair to what otherwise becomes a very time-consuming and expensive repair.
Forget about this bolt rusting again on your sway bar. Included are 2 correct bolts and blue thread locker to secure them in place.
For all 123 and 126 models from 1977 to 1991. This is a SAFETY ALERT! Your sway bar can break unexpectantly at the end if your car has been subject to chassis corrosion. Watch Kent's video below. He will explain how to inspect this area and why this part is your best option for repair.
Look for wetness around the back side of your tail lights as well as old streaks of white. These seals will leak when they are old.
When removing valve covers or changing wires, replace these with new ones. They may look good, but they usually break due to engine heat and age.
New black studded cap as shown.
This is a set of four STAINLESS STEEL custom machined Torx head door striker bolts. They will eliminate many headaches related to door closing issues on the W126 and 560SL doors.
Torx speed bit included. The door striker set shown includes eight new STAINLESS STEEL custom machined Torx bolts and instructions on installing and adjusting the new striker plates. What are the advantages of these new-style bolts?
Left and right door strikers as shown. No extras
Steel waste gate housing cover plate as shown. No hardware or gasket
Kent has been "into" lubrication since his younger years, flying and working on airplanes over 50 years ago.
Kent has been "into" lubrication since his younger years, flying and working on airplanes over 50 years ago.
Do you want the rear end to ride like a new on your later 126 sedan or coupe? Then you have to replace the key suspension rubber parts that attach the rear suspension to the car. This kit has the parts you need, but it does not include instructions.
Good used condition. no damage or excessive wear on the teeth.
This is a set of four STAINLESS STEEL custom machined Torx head door striker bolts. They will eliminate many headaches related to door closing issues on the W123 doors on all models from 1977 to 1985.
You will receive two specialty drill bits and a modified star socket, along with very detailed video instructions on how to use these tools to remove a damaged head hex bolt without damaging the door frame or the old striker.
If you round out a head on a W123, W126, or 560SL door striker bolt, you don't have to panic. This video will show you two ways to remove the damaged bolt using Kent's emergency removal tool set.
When you install a new door striker, you will have to adjust it so the door closes and fits properly. This can be time-consuming, as it involves a fair amount of trial and error.
Do you want to make the rear end ride like a new R107 - Then you have to replace the key suspension rubber parts that attach the rear suspension to the car. This kit has the parts you need. No instructions.
Kits contains:
This deluxe kit includes three products related to the rear-end fuel delivery system for the models mentioned. This is critical if you want to get one of these old V8 engines running properly, especially if it has not been running for a long time.
Kent will demonstrate in this 11-minute video how to repair small rust holes in the trunk wells on older Mercedes W116, W123, W126, W124 and W201 chassis. This technique can also be used anywhere you find small non-structural rust holes forming.
Rusty, pitted metal can be pretty ugly, even if you paint over it. If you try to fill it with regular Bondo, that will not work long-term.
These are the forward trailing arm bushings that connect the arms to the rear subframe. When these bushing get old or start to crack and break apart, you may hear noises in the back and the rear end may want to steer the car on its own.
This part wears out over time and can cause a number of problems. Door clunking going over rough ground, door not closing easily, door accidentally popping open while driving, or you find yourself slamming the door just to get it fully closed.
This part wears out over time and can cause a number of problems. Door clunking going over rough ground, door not closing easily, door accidentally popping open while driving, or you find yourself slamming the door just to get it fully closed.
GENUINE MERCEDES FRONT SUNROOF SEAL
In this video, Kent will show you the tricks of getting the front sunroof seal installed without pulling your hair out. It will require the tool shown that is included with the purchase of the front seal.
In this short video, Kent will demonstrate how to prep the sunroof if there is rust in the seal area and how to install a new rear seal using the tool, lubricant, and glue provided in his kit. PLEASE NOTE: The sunroof panel has to be removed from the car.
This tool is required to remove the prechambers in the OM 615, OM 616, OM 617, OM 601, OM 603 four, five, and six clyinder diesels through 1987 ONLY! Easy tool to use.
For all 108, 109, 114, 115, 116, 123, and 126 (up to 1985) with video instructions
6 "German style" non-cutting hose clamps as shown. These are wider than most to better seal the hose to the fitting. See our other hose clamp assortments below.
Learn how to install this critical repair kit correctly and how to test your monovalve function on the bench. In this 13-minute video, Kent shares how to install the kit while avoiding problems. Get your cabin heat working properly again!
This fits the U.S. models with automatic climate control which include the 1982 to 1989 R107 380SL, 500SL, and 560SL + the 1982 to 1985 W123 ALL models + the 1981 to 1991 W126 sedan and coupes. This is an easy fix that you can do yourself.
In this 24-minute instructional video, Kent shows you more than just how to change the transmission filter and the pan.
In this 19-minute detail instructions, Kent will show you how to get the old seal out, how to trial fit the new seal, and how to glue it in place properly. You can not believe how many seals we see that have not been installed properly.