ALERT: Miracle Paint is back in stock! CLICK HERE to order.
Left and right door strikers as shown. No extras
For later 1973 to 1980, 4.5 V8 engines - 450SL, 450SLC, 450SE, and 450SEL. Very nice set of high-performance wires for your 450V8. But we ask you to check your distributor cap before ordering as there was a change in 1973 and even some 1974 models may have the older orange/ brown color cap.
It is the front door strikers that usually wear out first. This complete kit will help you get the old bolts out and the new strikers installed and adjusted properly.
Kent has been "into" lubrication since his younger years, flying and working on airplanes over 50 years ago.
Kent has been "into" lubrication since his younger years, flying and working on airplanes over 50 years ago.
Very common wear item due to aging rubber. Can be easily installed by putting a piece of plywood on the bottom of the transmission pan and use a floor jack to lightly jack up the back of the transmission to replace the mount.
Do you want the rear end to ride like a new on your later 126 sedan or coupe? Then you have to replace the key suspension rubber parts that attach the rear suspension to the car. This kit has the parts you need, but it does not include instructions.
Do you want the rear end to ride like a new W123? Then you have to replace the key suspension rubber parts that attach the rear suspension to the car. This kit has the parts you need, but it does not include instructions.
Testing fuel pressure is a simple procedure on the D-Jetronic engines, but it is absolutely essential.
This is a set of four STAINLESS STEEL custom machined Torx head door striker bolts. They will eliminate many headaches related to door closing issues on the W123 doors on all models from 1977 to 1985.
The T45 speed bit included can be used in your drill to speed install and adjust the striker.The door strikers seem to wear out faster on the R107s than on any other chassis due primarily to the heavy doors.
You will receive two specialty drill bits and a modified star socket, along with very detailed video instructions on how to use these tools to remove a damaged head hex bolt without damaging the door frame or the old striker.
Kent has tried dozens. This is the best for serious buffing on old paint. Watch the video below for a quick demonstration. Fast cutting action and silicone free.
Do you want to make the rear end ride like a new R107 - Then you have to replace the key suspension rubber parts that attach the rear suspension to the car. This kit has the parts you need. No instructions.
Kits contains:
This deluxe kit includes three products related to the rear-end fuel delivery system for the models mentioned. This is critical if you want to get one of these old V8 engines running properly, especially if it has not been running for a long time.
Rusty, pitted metal can be pretty ugly, even if you paint over it. If you try to fill it with regular Bondo, that will not work long-term.
These are the forward trailing arm bushings that connect the arms to the rear subframe. When these bushing get old or start to crack and break apart, you may hear noises in the back and the rear end may want to steer the car on its own.
Do you want to make the rear end ride like a new R107 - Then you have to replace the key suspension rubber parts that attach the rear suspension to the car. This kit has the parts you need. No instructions.
Kits contains:
Now you can get your old SL PASSENGER door closing properly again! These strikers do wear out and can cause a number of problems.
Now you can get your old SL driver door closing properly again! These strikers do wear out and can cause a number of problems.
This part wears out over time and can cause a number of problems. Door clunking going over rough ground, door not closing easily, door accidentally popping open while driving, or you find yourself slamming the door just to get it fully closed.
This part wears out over time and can cause a number of problems. Door clunking going over rough ground, door not closing easily, door accidentally popping open while driving, or you find yourself slamming the door just to get it fully closed.
GENUINE MERCEDES FRONT SUNROOF SEAL
This tool is required to remove the prechambers in the OM 615, OM 616, OM 617, OM 601, OM 603 four, five, and six clyinder diesels through 1987 ONLY! Easy tool to use.
For all 108, 109, 114, 115, 116, 123, and 126 (up to 1985) with video instructions
You will need to loosen the bottom of the rear shock, disconnect the control arm from the outer knuckle, loosen the inside arm bolts, and drop the end of the control arm down. Kent designed this tool to make it easy for the DIY mechanic to do this job without having to take it into the shop.
It is the bushing you can not see and it is very hard to inspect. There are two ways you can replace them.
These are super absorbent, low lint, and have strong birch handles. More than enough to keep you busy for a while.
Only one available. Please do not try to order more.
These are becoming harder to find in good condition. They were often used as the spare tires in these older models.
Off low mileage coupe and in dry storage for the past 25 years. Excellent condition as shown.
This is actually 2 sets of bumpers that will allow you to make one really good set. I have been working to get a nice pair for the past 20 years to go on that perfect 6.9 but time is running out. On to the next enthusiast.
6 "German style" non-cutting hose clamps as shown. These are wider than most to better seal the hose to the fitting. See our other hose clamp assortments below.
If you plan to replace, test, or service your electronic fuel injectors you first must determine which bottom seals you will need. If you have a 1970 or 1973 model, you most likely have the single-bottom seal (unless your engine has been changed).
This fits the U.S. models with automatic climate control which include the 1982 to 1989 R107 380SL, 500SL, and 560SL + the 1982 to 1985 W123 ALL models + the 1981 to 1991 W126 sedan and coupes. This is an easy fix that you can do yourself.
Kent has learned that you really can not tell how good your v belts are by just looking at them, especially if they are over 15 years old. Kind of like old tires - they may look good on the outside.
For E430, ML430, E500, E55. S500, CL500, and SL500 through 2003. Every M112 V8 I have worked on starts making front engine bearing noise around 90K to 100K. Almost like clockwork! This is a service you will want to perform whether you have had your Benz for a long time or just purchased one.
Yes, YOU can fully drain all your transmission without using any type of "power flush." Full detailed video instructions are included. This kit is easy to connect and the process is quick and clean. Watch Kent's YouTube video below for full details.
For the past 20+ years, we have promoted H4 headlight upgrades for these old Mercedes. The original sealed beam headlight bulbs lacked light output, and we found them sometimes downright "sketchy" on dark roads, especially when deer were known to be present.
You will receive ten each of the following sizes: 8/12, 10/16, and 12/22. These are much better than U.S. style hose clamps that cut into the hose.
These require removal of the batter and possibly the brake booster to replace. They are split so you do not need to remove the sway bar. Plan to replace if doing work under the battery box area. Battery acid is hard on the right side.
These will no longer be printed when these are gone. They will still be available as a download. All books are signed by Kent. This is an end of an era for us. Most books are approximately 15 pages in length and covered with heavy clear plastic.
DO NOT ORDER UNTIL YOU REMOVE ONE INJECTOR IN YOUR ENGINE AND INSPECT THE HOLE. Sometime in 1974, Mercedes changed the way these injectors were sealed into the head to prevent air leaks. A "YELLOWISH" nylon sleeve was added along with two seals on the lower end of the fuel injector.
This kit has enough red clips (60) to do both sides on the 123 240D, 300D, 300TD, 300CD, 280E, and 280CE. You will receive the best tool to remove the side trim and the best tool to remove the old red clips from the side trim after removal.
You can not believe how easy it is to move and adjust your old seat after lubrication the tracks with this amazing lubricant! You will receive two full tubes plus the extension nozzle. This is more than enough lube to do the seats with four tracks on each side.
New quality aftermarket part as shown. Door panel must be removed to replace. Fits either door.
These quality 6.5 inch wire cutters are made of special steel, the blades are high-frequency hardened steel. Suitable for cutting soft copper wire, plastic wire, small cable, aluminum wire, soft alloy wire, jewelry making, multifunctional manual edge banding pliers.
I call this the hidden and forgotten bushing. Why? Because you can not see it to inspect it, it hardly ever gets changed. When these bushings wear out you will feel "weird" movement in your rear end, especially going over rough ground.
This is the best way to determine if the expensive injection pump is going to work for old 4 AND 5-cylinder diesel engines that have not run in years. Watch the video below to understand what this kit can do.
Watch the video below to understand what this kit can do. Ensure your injection pump is thoroughly cleaned and lubricated before starting the engine after long storage.