116 Vacuum Door Lock Check Valve (blue)
FITS THE FOLLOWING: all 116 sedans built from 1973 to 1980.
ALERT: Miracle Paint is back in stock! CLICK HERE to order.
FITS THE FOLLOWING: all 116 sedans built from 1973 to 1980.
Fits all 116 Chassis 1973-1980. The best way to restore the original ride and feel of your Mercedes is to replace your shocks with new Bilsteins. There is no other shock that will perform as well. These are OEM COMFORT shocks that give you the smoothest ride.
Fits all 123 300TD wagon rear wiper assemblies. High quality Bosch Excel wiper blade that will correctly fit on the rear wiper arm. Don't settle for a cheap replacement that can scratch your rear window glass. Check out our matched 123 front wiper blade set.
Here is a common rubber part that is wearing out as these cars get 15 to 20 years old. If your rear end is sitting lower than is use to, this could be the culprit. It is the mount that is bolted to the rear end center housing.
Fits 123 1980 to 1985.
If your trunk lock is acting up may be a bad vacuum lock assembly in the trunk. This is a brand new vacuum unit in perfect condition, and includes our PDF DIGITAL Manual, 123 vacuum door lock troubleshooting guide!
FITS THE FOLLOWING: all 123 chassis sedans and wagons from 1977 to 1985.
This is a drivers side Front OR rear door striker plate. We also offer this item in a full kit with instructions, bolts and special tool. Look below to order the complete kit.
Fits 115 chassis from 1974 to 1976 AND 123 chassis all models 1977 to 1985. Brand new part! This is a common item that breaks or wears out. This is the hood release lever that is located inside the car. If you are tired of using pliers to open your hood this should help.
FITS THE FOLLOWING: all 107 chassis from 1973-1991.
FITS THE FOLLOWING: all 126 chassis sedans from 1981-1991 - 300SD 300SDL 350SD 350SDL 380SE 380SEL 500SEL 420SEL 560SEL 300SE 300SEL door check straps (2) for your 126 chassis Mercedes Benz sedan and all 1986 to 1991 300E 300D 260E 400E 500E.
FITS THE FOLLOWING: all 107 chassis SL and SLC from 1972 to 1989.
Fits all 114 115 116 107 123 124 126 drivelines 1968 to 1993.
FITS THE FOLLOWING: all W123 chassis 1977 to 1985. 240D 300D 300CD 300TD 280E 280CE. Make it easier to get your hood open. Replace your broken hood pull lever, or have this for a spare when yours breaks (which they do!).
Fits all W126, W201 and W124 chassis 1981 to 1995. Brand new accelerate throttle pedal. Easy to install. Commmonly breaks where it attaches to the metal rod causing sticking and loss of power. Check yours out today. New rubber surface keeps foot from slipping off the pedal.
APPLICATION:For 190D 200D 220D 240D 300D 300CD 300TD 300SD 300SDL. Also 350SD 350SDL 190D 2.5 300D 2.5 with conditions***
I have been discovering this is one of those maintenance areas that suffers from severe neglect. Failure of the rubber support or center drive shaft bearing can cause all types of improperly diagnosed vibration problems - some commonly change with vehicle speed.
This is now becoming one of the most common oil leaks in 1968 to 1985 diesel engines. Let's face it. These engines are getting older and the rubber seal is wearing and becoming more brittle with time.
FITS THE FOLLOWING: 123, 240D, 300D, 300TD and 300CD from 1977 to 1985. The original fuel lines on most late 70s and early 80s Mercedes Diesels were braided line and with age they do rot and develop slow leaks.
FITS THE FOLLOWING: All 110, 115 and 123 four cylinder diesel engines. Replace that valve cover gasket every time you adjust the valves. Will keep those unsightly oil leaks around the valve cover at bay. Fits 220D and 240D.
Fits 116 123 and 126 chassis diesel engines from 1977 to 1985. This includes the 240D, 300D, 300TD and 300D/300SD turbo engines. This short coolant hose is located right below your engine thermostat housing. Replacing it requires removal of the thermostat housing from the cylinder head.
Fits 123 Chassis 300D, 300CD, and 300TD TURBO ONLY 1981 to 1985 and 116 and 126 300SD models 1978 to 1985 with 5 cylinder TURBO diesel engines. If your 5 cylinder turbo diesel has more than 200,000 miles on it without any major work, it most likely needs new valve stem seals.
This kit fits ALL 116, 123 and 126 4 and 5 cylinder diesels, 616 and 617 designation. This is one of the most common oil leaks on the older Mercedes diesels from 1977 to 1985. It is often found at the gasket between the engine block and the oil filter housing.
FITS THE FOLLOWING: 116,123,126, 5 cylinder turbo diesels with an air filter on the engine, from 1978 to 1985.
FITS THE FOLLOWING, 126 300SD from 1981 - 1985. The original fuel lines on most late 70s and early 80s Mercedes Diesels were braided line and with age they do rot and develop slow leaks.
FITS THE FOLLOWING: 123, 126 Chassis 300D 300CD 300TD 300SD (from 1981 to 1985) with 617 5 cylinder turbo diesel engines. Have you noticed your Mercedes diesel sedan is recently shaking more at idle? Maybe you are noticing new vibrations that were not there before.
Fits all 115 chassis. Mercedes Diesel engines from 1968 to 1976. This includes 220D, 240D and 300D. Here is a chance to pick up all those most used diesel engine service parts in one kit for one great price. These are high quality replacement and service parts.
Fits ONLY 110 and 115 chassis 200D, 220D, 240D and 300D from 1966 to 1976. This kit should give you at least a years supply of fuel filters for your diesel. You will receive 2 main fuel filters and 3 clear plastic high quality inline straight prefilters.
FITS THE FOLLOWING: All Mercedes Diesel engines from 1968 to 1999. This includes 115, 123, 116, 126, 201, 124 and early 140 chassis. Also 210 Chassis E300D to 1999, 220D 240D 300D 300TD 300CD 190D 300SD and 300SDL.
Brand new electronic oil pressure sending unit. If your gauge is erratic or it suddenly has been reading very low, this electric sender may be the culprit.
Fits all the following models listed below:<p>
Fits 116, 123 and 126 chassis diesel 1977 to 1985 only, including the 240D 300D 300CD 300TD 300SD. This kit should give you at least a years supply of fuel filters for your diesel.
Fits 115 and 123 Chassis 220D 240D from 1968 to 1983. If your 4 cylinder diesel has more than 200,000 miles on it without any major work, it most likely needs new valve stem seals.
Fits W115 W116 W123 and W126 5-cylinder both turbo and non-turbo diesel engines from 1975 to 1985. Check yours for staining around the gasket. Also, check nuts for tightness. These symptoms may indicate a leak. This is an important maintenance item.
Fits all 123 240D 300D 300TD 300CD sedans, coupes and wagons 1977 to 1985, and All 126 Chassis 300SD from 1981 to 1985. This is the you need for the cure to a very common problem. There is nothing worse than fuel smell coming from the trunk of your 123.
This is a great gift for the older Mercedes Benz Enthusiast! Sold in increments of $25. This gift certificate can be toward the purchase of any item or items on our website .
Can be used in 110, 111, 108, 113, 114, 115, 123, and 201 chassis manual transmissions. Synthetic Gear Oil can offer smoother shifting especially on cold mornings before the transmission fluid has warmed up. It can also offer reduced wear on the gears and syncros over time.
Fits 115, 116, 123 and 126 5 cylinder diesel engines (both non-turbo and turbo) from 1975 to 1985. These should be changed every time you remove your valve cover for valve adjustment or other maintenance. Stock up now for a great price on a set of 3.
WORKS ON THE FOLLOWING All diesel 110, 115, 116, 123, 126, 201, and 124 chassis. 190D, 200D, 220D, 240D, 300D, 300CD, 300TD, 300SDL, 350SD, 350SDL, E300D.When it comes to diesel engine performance this is your best bang for the buck.
FITS THE FOLLOWING: All Mercedes Diesel engines from 1977 to 1985 except 190D. This includes 123, 116, and 126 chassis 240D 300D 300TD 300CD and 300SD. Here is a chance to pick up all those most used diesel engine service parts in one kit for one great price.
FITS THE FOLLOWING: all 123 and 126 chassis, Idle Stabilizer For 1981 to 1985 Turbo Models only 300D 300CD 300TD 300SD.
ALERT! ALERT! 10 years after I first started warning about this, I saw it again in my shop on Feb. 20, 2011. Seems to be happening even more now as these radiators age. I loosened up the upper hose clamp on this 123 300TD radiator and it just fell off.
This gasket should be replaced when you remove the oil cooler housing to replace the main block gasket. These get old and hard and will leak due to age. Easy to do it on the bench. Not so easy to do it on the car.
Fits all W116, W123, and W126 Turbo Diesel 5 cylinder 300D and 300SD engines from 1981 -1985 as well as M110 6 cylinder engines from 1977 to 1985. This is a brand new Lower engine Oil Pan and Gasket. Remove and inspect your oil pan if it has been badly dented.
Here is another diesel item I strongly believe should be replaced as a preventative measure. Water pumps do not last forever and when they go, it is usually when you are on a trip - right? I feel they should be changed every 100,000 miles.
The Monark brand is no longer made. The Bosch pump is hard to find. This is the best alternative we can provide. For older models with primer pump mounted on the injection pump.
Here is a set of three straight inline fuel pre filters with strong plastic nipples and reinforced housing that fit 8 mm or 5/16 fuel hose.
PLEASE NOTE: WE SHIP EITHER FEBI OR HENGST AND COLOR OF FILTER SCREEN CAN VARY, DEPENDING ON WHAT IS AVAILABLE.
FITS THE FOLLOWING: all 115, 116, 123, and 126 chassis with 5 cylinder engines. Always replace that valve cover gasket every time you adjust the valves (every 12,000 to 15,000 miles). Will keep those unsightly oil leaks around the valve cover at bay.
FITS THE FOLLOWING: All models PON, FIN, P55, 110, 111, 112, 113, 108, 109, 114, 115, 107, 116, 123, 124, 126, and 201 chassis. Here is my all time favorite gasket maker and sealant. You may already know how I feel about RTV silicone products (I think they should be outlawed!).
Fits the following 116, 123, and 126 chassis to 1985. This is a very important line on the 617 turbo diesel engines that often breaks or becomes plugged. When it does you will lose power. It will feel like you are dragging an anchor or give you the indication your turbo is not working.
Fits 110, 115 and 123 four cylinder diesel engines. These should be changed every time you remove your valve cover for valve adjustment or other maintenance. Stock up now for a good price on a set of 3.
When replacing your valve cover you may need wave washers. Look below.
Fits all 123 and 126 chassis and later R107 as noted above - both gasoline and diesel models. It may fit a few other models as well but you MUST measure your old hose before ordering. We also carry the 15mm hose for most of the older models. See related products below: